FRONT SIDE

Hybrid VME64x/VPX Backplane,              3U 8 slot

Specifications:

  • Compliant to VITA 46.0 baseline specification

  • Supports VITA 46.1 VME

  • Supports VITA 46.4 PCI Express

  • 8 Slots 3x (VME) + 5x (VPX)

  • Full Mesh X4 configuration for PCI Express

  • M4 studs for powe rentry

  • PCB size 128.5mm x 204.3mm x 4.3 mm

  • 4 HP from slot to slot (20.32mm)

  • with JTAG connector on first and last slot

  • Flexible keying and alignment mechanism

  • System Management Interface on the backplane (IMPB, SMB)

  • with geographical address pins

  • Reference clock

  • Non-Volatile Memory Read Only signal set by Jumper BR1

  • Battery backup option setting by Jumper X5. Vbat external or connected to 3.3 AUX.

  • System Reset

  • P1 Reserved Signals

  • Operating temperature: -40° - +85°C

  • Storage temperature: -55°C - +85°C

  • Flammability rating: UL94-V0

 


 

 

 REAR SIDE
 
Order no.
Product Description

B190350230

Hybrid Backplane 3U 5 Slot, 3-VME64x Slots + 5-VPX Full Mesh X4 Slots

 

Topology: Full Mesh X4 PCI Express configuration

  • “Fat pipes“ from Slot to Slot, 4 lanes/ link (= 8 differential pairs)

 

Power Studs M4

  • The main operating voltages (+12V, +3.3V, +5V) and GND are supplied with M4 screw terminals.
  • The auxiliary operating voltages are supplied via M3 screw terminals. Optimal daughter board supply and trouble-free operation are ensured by the  arrangement of the feed modules on the backplane.
  • The permissible max. current are 40 A/ M4 screw
  • Consider: Max. 36A/ Slot acc. VITA 46.0 allowed

Utility connector

  • There are 2 connectors for system management IPMB and SMB. IPMB_PWR and SMB_PWR are connectable to power with 3-pin feed-through connectors (X2/X4).
    For customer specific board assembly  Zero-Ohm resistors are available.
  • Usable voltages for IPMB are 5V / 3.3V-AUX and for SMB 5V / +5VSTBY.
  • In addition 2 JTAG-Connectors for VPXSlots 4 (X200) and 8 (X201) are available.
  •  

JTAG connector

  • In addition 2 JTAG-Connectors for VPX Slots 4 (X200) and 8 (X201) are available. 







     

 VBAT X5

  • Normally a battery voltage with approximately 3V is available at Pin VBAT
    of connector VPX-J1. The voltage is externally accessible with connector X5 or
    internally using 3.3V_AUX by closing Jumper BR2.

 

NVMRO

  • If Jumper BR1 is closed NVRMO is set to memory writeable.


     

 System Controller Module    

  • The first VPX-Slot is provided for a system controller   module. In this case Jumper BR3 has to be closed.

     

Custom Solutions:

Hartmann Electronic has been designing custom analog, digital, and mixed signal high-speed boards for over 35 years, with over 5,000 custom designs to date. Using state of the art design tools and fully automated production equipment, we provide custom solutions that fulfill the most exacting requirements with maximum packaging density.

Learn about our custom backplane capabilities