FRONT SIDE

VPX Backplanes, 3U 4 and 5 slot            Full Mesh X1

Specifications:

  • Compliant to VITA 46.0 baseline specification

  • Supports VITA 46.10 with RTM connectors

  • Supports VITA 46.4 Full mesh X1 PCI Express

  • 3U, 5 slot, Full mesh configuration, 3.125 Gbaud

  • Material:  FR-4

  • M4 studs and ATX 24-pole connector for power entry

  • PCB size 128.5mm x 120.7mm x 5.4 mm

  • 4 HP from slot to slot (20.32mm)

  • Flexible keying and alignment mechanism

  • System Management Interface on the backplane (I2C1, 12C2)

  •  with JTAG connector on first slot

  •  with geographical address pins

  • Reference clock

  • Non-Volatile Memory Read Only signal set by Jumper BR1

  • Battery backup option setting by Jumper X5. Vbat external or connected to 3.3 AUX.

  • Power Consumption:  VS1:VS2:VS3 = 40A : 80A : 80A (36A/ Slot and Voltage)

  • System Reset

  • P1 Reserved Signals

  • Operating temperature: -40° +85°C

  • Storage temperature: -55°C +85°C

  • Flammability rating: UL94-V0

 


 

 

 REAR SIDE
 
Order no.
Product Description

2.K2304010

VPX 3U 4 Slot,  Full Mesh X1

2.K2305010

VPX 3U 5 Slot, Full Mesh X1

 

Backplane Topology: Full Mesh X1


 

System management IPNB (I2C1, I2C2 connector):

  • There are 2 connectors (5 poles) for system management I2C1, I2C2.

 VBAT X5 (X5 connector):

  • Normally a battery voltage with approximately 3V is available at Pin VBAT of connector VPX-J1. The voltage is externally accessible with connector X5 or
    internally using 3.3V_AUX by closing Jumper BR2.
  •  

NVMRO (BR1 jumper):

  • If Jumper BR1 is closed NVRMO is set to memory writeable

 JTAG (connector XJT1)

  • For test and programming a JTAG connector (6-pole) is implemented (XJT1).

 

Power connection (X1 or M4 screw):  

  • The main operating voltages and GND are supplied with M4 screw terminals or connector X1 (fits to ATX connector without locking mechanism). 
  • The auxiliary operating voltages are supplied via M3 screw terminals. Optimal daughter board supply and trouble-free operation are ensured by the arrangement of the feed modules on the backplane.
  • If Jumper X6 is closed ATX power supply starts automatically

 

Custom Solutions:

Hartmann Electronic has been designing custom analog, digital, and mixed signal high-speed boards for over 35 years, with over 5,000 custom designs to date. Using state of the art design tools and fully automated production equipment, we provide custom solutions that fulfill the most exacting requirements with maximum packaging density.

Learn about our custom backplane capabilities